Exhaust Manifold Stud ACX2619540
Exhaust Manifold Stud V836859034 for Massey Ferguson Tractors.
M10 X 130.
€4.85
Part Condition Descriptions
OEM: Original Manufacturer Part
Alternative: Compatible Replacement Part
Recon Exchange: Rebuilt to working condition
Used: Recycled parts from end of life tractors
Exhaust Manifold Stud ACX2619540 for Massey Ferguson Tractors.
More Information About Massey Ferguson Exhaust Manifold Stud ACX2619540
The Exhaust Manifold Stud ACX2619540 is a heavy-duty fixing designed for Massey Ferguson tractors. It’s used in the exhaust manifold area, where heat and vibration are constant. Therefore, it needs to hold firmly and stay secure. This stud helps clamp exhaust components correctly, so joints stay aligned and sealed. As a result, you can reduce the risk of blowing gaskets, exhaust leaks, and unwanted noise.
Exhaust hardware lives a hard life. However, studs can stretch, corrode, or seize over time. Then removal becomes difficult. In addition, worn threads can prevent proper torque. That can lead to loosening under load. So, replacing the stud during manifold work is a smart move. It supports a cleaner repair and helps avoid repeat downtime.
ACX2619540 is listed as an AGCO stud bolt for Massey Ferguson applications. So, it is intended to match the original fit and thread form for the correct location. Likewise, using the correct part number helps ensure nuts seat properly and the manifold pulls down evenly. Our Tractor Compatibility section below will help you identify the suitability for your tractor.
This stud is ideal when you are fitting a new manifold gasket, repairing a cracked manifold, or replacing an exhaust elbow. It is also useful if an old stud snaps during removal. Because one weak fixing can compromise the whole joint, renewing studs as a set is often worthwhile.
Installation is straightforward. First, let the engine cool fully. Next, clean the threaded hole and remove rust and carbon. Then test-fit the stud by hand to avoid cross-threading. After that, tighten to the manufacturer specification. Finally, re-torque after heat cycling if your service manual recommends it.
Choose the Massey Ferguson Exhaust Manifold Stud ACX2619540 for a secure, reliable exhaust repair. It’s a small part. Yet it carries a big load. And it helps keep your tractor running tight, quiet, and dependable.
Need more parts for your exhaust manifold? Browse and Buy Now.
Alternate part numbers
V836859034, ACX2619540
Compatible with
Condition part number
Additional information
| Weight | 0.07 kg |
|---|---|
| Dimensions | 14 × 1 × 1 cm |
| condition | OEM, Economic, Recon Exchange, Used |
| Engine |



Reviews
There are no reviews yet.