Levelling Box Threaded Bar 3582541M2

Levelling Box Threaded Bar 3582541M2 for Massey Ferguson Tractors.

More Information About Massey Ferguson Levelling Box Threaded Bar 3582541M2

The Levelling Box Threaded Bar 3582541M2 is a key linkage component for Massey Ferguson tractors. It is designed to work with the levelling box on the three-point linkage. Therefore, it helps you set implement height and side-to-side level accurately. As a result, mounted equipment runs straighter, works more evenly, and causes less strain on the tractor and implement.

Levelling is important in daily work. However, worn or damaged threaded bars can make adjustment difficult. Threads can seize. They can also strip after years of load and dirt. Then the linkage may not hold its setting. In addition, uneven levelling can affect performance in the field. For example, a mower can scalp on one side. A box blade can cut unevenly. And a sprayer boom can sit out of level. So, replacing the threaded bar is a practical repair.

The 3582541M2 bar is made to suit agricultural conditions. It is built for strength and consistent adjustment. It also supports smooth movement when kept clean and lubricated. Moreover, correct thread form and length help the levelling box operate as intended. That means easier fine-tuning and a more stable setting under load.

This part is ideal for maintenance, refurbishment, and linkage rebuilds. It is also useful after impact damage, where the bar may bend. Because fitment can vary by model and linkage specification, always confirm your tractor model and serial number before ordering. You can check this below on our Tractor Compatibility section. Likewise, compare the old bar length and thread size where possible.

Installation is straightforward. First, lower the linkage safely and support the implement if attached. Next, remove the old threaded bar and inspect the levelling box and clevis points for wear. Then clean the threads and apply suitable anti-seize or lubricant where recommended. After that, fit the new bar and set an initial adjustment. Finally, lift the linkage, check implement level, and recheck lock points after a short period of use.

Choose the Levelling Box Threaded Bar 3582541M2 for dependable adjustment and better implement control. It’s a simple part. Yet it makes setup quicker and results more consistent, day after day.

View more level arm parts here.